SMOAD Networks

September 21, 2022

Reasons Your Broadband Wi-Fi Is Unstable

A stable Wi-Fi connection throughout the day would be such a blessing. Especially if you are a work-from-home pro or a web series lover, you will need an extraordinarily robust and reliable internet connection sans interruptions.

Even the most acceptable network connections falter because of the space in your office or home, called dead zones with the lowest network reception. Numerous factors affect the speed, coverage, and stability of Wi-Fi Connections. If you get to know these factors and improve your network infrastructure, you can enjoy reliable connectivity at an affordable rate.

Significant reasons why your broadband Wi-Fi is unstable

Physical Distance
You might face poor connectivity if your device exceeds the Wi-Fi router’s coverage area. The connection would deteriorate further when this distance increases. So, set up your work area closer to your Wi-Fi router.

Obstruction
Wi-Fi signals can rather easily flow through walls and other obstructions. But in some barriers, which are thicker or made of reinforced concrete, which could prevent some signals from passing through, Wireless signals can easily pass-through materials including drywall, plywood, other types of wood, and glass.

Radio Interference
When you have devices with the same frequency bands, such as microwaves, or cells, your Wi-Fi signals could experience interruption. If you do not have such devices, look for interferences from your neighbour’s devices.

Single Router
If you live in a mansion-house and have multiple devices connected to the internet, then a single Wi-Fi router wouldn’t suffice. One router alone cannot guarantee an uninterrupted connection across devices placed at different locations on your property. Consult with your service provider and consider pairing up other technologies to offer holistic coverage across your space. Most importantly, replace your router if you feel it isn’t fulfilling your connectivity goals.

Excessive Bandwidth
You cannot expect a stable network connection if the Wi-Fi router is overloaded with devices that consume a lot of bandwidth. Either consider unplugging devices when not in use or investing in increasing the bandwidth capacity.

Damaged Wire
Cables and Fibre lines connected with your 4G router are susceptible to wear and tear over time. Harsh weather and lack of maintenance could be possible reasons for cables’ wear and tear. You must frequently check for such signs of damaged wires and replace them if necessary.

Software Issues
This may be a rare reason, but if your router is not optimally configured, you might face poor connectivity. If you aren’t that tech savvy, get help from network providers to help optimize your router functionality.

Outdated Router
If you believe your router to be the problem, it could be time to start budgeting for a replacement. It’s a good idea to upgrade your router every two years to prevent some issues.

Few tips to resolve Wi-Fi connectivity issues

  1. Move Closer to the router – Try reducing the distance between your device and the router. Consider setting up your work desk near the Wi-Fi hotspot.
  2. Disconnect Unused Devices – Available bandwidth gets reduced as you increase the number of devices used. If you aren’t using a particular device, disconnect it from the network so that more bandwidth is available to devices requiring it the most.
  3. All wireless devices must be kept away from each other – To avoid radio signal clashes, keep every wireless device away from one another.
  4. Make tweaks to Your Wi-Fi channel – You can avoid devices connecting to crowded networks with slight tweaks. Get help from your service provider or a network assistant to make small changes.
  5. Use Mesh – It is impossible to obtain maximum coverage if you rely on a single 4G router to provide a vast workspace. You can amplify your Wi-Fi connection by installing mesh kits.
  6. Keep everything updated – If the hardware requires replacement, do that. If one device’s software is slowing down the internet, have them corrected.
  7. Switch to cable when Important – You can’t afford a blackout exactly when you are presenting a demo over a zoom call. When dealing with important meetings or calls, plug in an Ethernet cable to avoid interruptions.
  8. Upgrading Firmware – You can try upgrading your router’s firmware. An old firmware may contain bugs that could lead to occasional crashes or reboots, thus affecting the connectivity. It may also contain any security holes that may compromise your data security. Most hackers know of such vulnerabilities and can perform targeted attacks specific to this router hardware model and the firmware version.
  9. If your Wi-Fi is slow, try physically connecting a laptop to your modem and check your internet speed on a website like speedtest.net. If your internet connection rather than your router is the issue, your speeds may still be slow. Contact your ISP.
  10. Sometimes, your internet connection can be affected by malicious code on your computer. Do a scan for spyware, viruses, and malware, which can significantly impact your web-surfing speed and overall system performance.

Stay in control of your internet and keep it under regular check to avoid network problems.

SMOAD Routers
SMOAD specializes in Software-defined networking and connectivity solutions. Our USP has been multiple aggregating networks like 4G LTE, Broadband, RF, or any data transport using an indigenously designed router, ensuring 99.99% uptime with seamless failover. SMOAD SD-WAN gives you uninterrupted internet, flexibility of location, ease of use, and many more features to help you work from anywhere. Be secure, seamless, and wireless with SMOAD.

Call for a demo.